Cloud CX-A6 Guide de l'utilisateur télécharger pdf (Page 5)

CX-A6 I

NSTALLATION AND OPERATION MANUAL

1 2 3 4 5 6

12 13 241526

INPUT 1

1 2 3 4 5 6

POWER

AMPLIFIER

LEVEL

CONTROL

SOURCE

SWITCHES

INPUT

AMPLFIER

SIX CHANNELS OPERATING AS INDEPENDENT AMPLIFIERS

INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6

4 Output Details

Binding posts are provided on the rear panel for the six speaker outputs and these can

accommodate flexible leads up to 2.50mm². The posts are not compatible with 4mm

'Banana' plugs. Each speaker lead should be a twisted pair; having an untwisted section

of cable for as little as 10cm before its termination will significantly increase cross-talk. It

is also good practice to distance the output wiring from the input wiring. Do not make any

connections to the unit with the power cable attached.

5 100V Line operation

Connecting a CXL-100 100W 100V-line

module across an output of the CX-A6 will

obtain a 100W 100V-line output from that

channel. The CXL-100 has to be mounted

externally of the amplifier and 70V or 100V-

line operation is selectable by taking the

output of the CXL-100 from the necessary

70V or 100V screw terminal.

A 2U 19" rack panel (CXL-600) is available

that accommodates up to six CXL-100

transformer modules.

The following page contains important

information on configuring the CX-A6s 65Hz

filters

15-07-02 V8

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Cloud CX-A6 Guide de l'utilisateur Page 5