Cloud 36 Spécifications

36/50 2 Zone Integrated Mixer Amplifier Installation & Operation Manual V5.0 Cloud Electronics Limited 140 Staniforth Road, Sheffield, S9 3HF

36/50: Installation and Operation Manual 9 When setting the jumper(s) please ensure that you: • Remove the mains cable from the rear of the produc

10 36/50: Installation and Operation Manual Level Control A maximum gain reduction of 60dB can be achieved with a control voltage of +10V; the rate o

36/50: Installation and Operation Manual 11 (primary & secondary series connected) and we recommend the fitting of the screening can (part num

12 36/50: Installation and Operation Manual 28 Technical Specifications Line inputs Frequency Response 20Hz-20kHz ±0.5dB Distortion <0.05% 20Hz

36/50: Installation and Operation Manual 13 06/12/02 V5.0 Safety Considerations and Information The unit must be earthed. Ensure that the mains p

36/50: Installation and Operation Manual 1 36/50 Integrated Two Zone Mixer Amplifier Installation and Operation manual Contents Section Page

2 36/50: Installation and Operation Manual 1 Safety Notes • Do not expose the unit to water or moisture. • Do not expose the unit to naked flames. •

36/50: Installation and Operation Manual 3 4 Installation The Cloud 36/50 is suitable for mounting in a standard 19" equipment rack and occup

4 36/50: Installation and Operation Manual The RSL-6A and RL-1A are available for the American market. They have identical operation to the RSL-6 an

36/50: Installation and Operation Manual 5 10 Microphone Input Location of Jumper J1 A micr

6 36/50: Installation and Operation Manual Multiple CPM paging microphones can be connected to a 36/50 when wired as the following diagram shows, eac

36/50: Installation and Operation Manual 7 position, in this case the music source, microphone and music levels track the Zone 1 settings. When s

8 36/50: Installation and Operation Manual To fit an EQ card: 1. Switch off at the mains supply and remove the power lead from the unit. 2. Remove