Clearly better sound
CLOUD VTX POWER AMPLIFIERS
MODELS VTX4120, VTX4240 & VTX4400
Cloud Electronics Limited
140 Staniforth Road,
Shefeld,
S9 3HF
.
England.
T
elephone:
+44 (0)114 244 7051 Fax:
+44 (0)114 242 5462
W
eb:
www
.cloud.co.uk Email:
[email protected]General Description
The Cloud VTX range of four-channel power ampliers are
intended for commercial and industrial public address and sound
reinforcement applications where unquestionable long-term
reliability is the primary consideration.
There are three models in the range:
MODEL POWER
VTX4120 4 x 120 W
VTX4240 4 x 240 W
VTX4400 4 x 400 W
The ampliers are designed to deliver their full rated power into
loads down to 4 ohms for long periods of time. The circuit design
includes clip limiting and switch-on delay, together with DC, thermal,
short-circuit and reactive load protections. All models are built in
a very solid steel 2U chassis, and employ variable–speed forced-air
cooling.
Pairs of channels may be operated in Bridge Mode; rear panel
switches are provided to enable this. Bridge Mode operation allows
power outputs of double the normal rating to be delivered to a load
of 8 ohms (minimum).
In addition to the power switch, the front panel is tted with a set of
four LEDs for each channel, conrming power status, signal presence,
peak level and activation of amplier protection circuitry. Rear panel
controls are provided for individual channel gain trims, input routing
(to congure the ampliers for mono, dual stereo or four channel
operation), Ch1/2 and Ch3/4 bridge mode, and per-channel high pass
lters. The inputs are electronically balanced.
Standard options are the Cloud RL-1 remote volume control plates
and Bose® EQ cards, either or both of which may be tted to any
or all channels. A further option is the VTX-WM1 web monitor card,
which permits continuous external surveillance monitoring of the
amplier’s performance on any computer via a standard Ethernet
connection. See VTX-WM1 datasheet for full details.
• High power multichannel ampliers for “install-and-forget”
applications
• 4 x 120 W (VTX4120), 4 x 240 W (VTX4240) and 4 x 400 W
(VTX4400) into 4 ohms
• Extensive protection against short-circuit and reactive loads,
clipping, DC and overheating
• Chs1 & 2 and/or 3 & 4 may be operated in Bridge Mode
• Per-channel, front-panel LEDs for power status, signal presence,
peak level and protection
• Balanced line level inputs with gain trim
• Congurable for 4 channel, dual stereo or mono use
• Per-channel switched hi-pass lter (18 dB/oct below 65 Hz)
• Optional VTX-WM1 card allows amplier monitoring from any
standard web browser
• Optional remote volume control (per-channel)
• Optional Bose® EQ cards (per-channel)
• 2U 19” rackmounting unit
• Forced-air cooling
• Five year warranty
VTX Power Amplier (tted with optional VTX-WM1 web monitor card)
PEAK
SIGNAL
POWER
1 2 3 4
PROTECT
CHANNEL
VTX 4120
4x 120W Amplifier
PEAK
SIGNAL
POWER
1 2 3 4
PROTECT
CHANNEL
VTX 4240
4x 240W Amplifier
PEAK
SIGNAL
POWER
1 2 3 4
PROTECT
CHANNEL
VTX 4400
4x 400W Amplifier
O
I
CHANNEL 2CHANNEL 1 CHANNEL 3
CHANNEL 4
CH3 CH4
CH2
SPEAKER OUTPUTS
0V
CH1
0V
CH2
0V
CH3
0V
CH4
ON
OFF
ON
OFF
ON
OFF
BRIDGE
1-2
ON
OFF
BRIDGE
3-4
4 OHMS - MIN
BRIDGE
3-4
BRIDGE
1-2
POWER ~ 40-60Hz
10%
Commentaires sur ces manuels